IBASE

Industrial Automation

207-ADIO-KIT

8-Ch. AI / 2-Ch. AO / 8-Ch. DI / 8-Ch. DO Slave Module

8-Ch. AI, 2-Ch. AO, 8-Ch. DI and 8-Ch. DO slave moduleMax. 100Mbps transfer rateEasy installation with RJ45 phone jack and LED diagnostic207-ADIO-KIT supports TwinCAT with ESI File, and Object Dictionary of PDO and SDODIN rail mounting (L-122 x W-124 x H-104 mm)
Specification

The 207-ADIO-KIT is an 8-channel Analog Input (AI), 2-channel Analog Output (AO), 8-channel Digital Input (DI) and 8-channel Digital Output (DO) slave module with the pluggable terminal block. With EtherCAT® control, it will lead to fast ethernet and full-duplex serial interface. The transmission speed is up to 100 Mbps. The digital slave can connect different slaves serially with cable CAT5 UTP/STP ethernet cable. 207-ADIO-KIT also supports TwinCAT with ESI File, and Object Dictionary (OD) of PDO and SDO. 

 

207-ADIO-KIT has passed RSI-ECAT Certificate. Click me for English version test report. Click me for Japanese version test report.

Serial interface Fast Ethernet, Full-Duplex
Distributed clock 1ms
Cable type CAT5 UTP/STP Ethernet cable
Surge protection 10KV
Transmission speed 100Mbps
I/O isolation voltage 3750Vrms
Number of inputs 8 Ch.
Input types NPN open collector Darlington transistors
Input impedance DI/O Control: 5.6KΩ/0.5W
Input current ±5mA(Max)
Number of outputs 8 Ch.
Output types NPN open collector Darlington transistors
Output range ±10V
Switch capacity Each output Ch. is 100mA at 24VDC
Response time On to Off, about 50μs;
Off to On, about 10μs
Over current protection 1A (Max.) for each port (8-Ch.)
Number of inputs 8 Ch.
Effective resolution 16bits
Input current 0~20mA
Input range Single End: ±10/±5/±2.5/±1.25V;
Differential: ±10/±5/±2.5/±1.25V
Conversion time ~ 125µs
Number of outputs 2 Ch.
Effective resolution 12bits
Output range ±10V
Operation mode Ramp and Noise, Single Value, Single Coupled Value, Pattern
Power supply 24VDC±10%
Power consumption 3W typical
Working temperature 0 to 60℃
207-ADIO-KIT 8-Ch. AI / 2-Ch. AO / 8-Ch. DI / 8-Ch. DO slave module with Switch / LED / Meter on-board
207-A121D 8-Ch. Analog Input (AI) and 2-Ch. Analog Output(AO)
8-Ch. Digital Input (DI) and 8-Ch. Digital Output (DO)
SCB-1BB-06A/10A/20A/30A/50A/A0A CAT5 LAN cable, 0.6M/1M/2M/3M/5M/10M
DATASHEETS
207-ADIO-KIT

RELATED PRODUCTS