iBase

RISC Platform

RP-101-SMC

Carrier Board for SMARC Modules

For SMARC form factor modules19V DC-in, reset, power, RTC functionSupports Gigabit LAN, audio, USB OTG, HDMI, COM (RS232/422/485) Micro SD socket, Mini PCI-E with USB, SIM socket on board2x isolated CAN transceiver, TTL, LVDS, HDMI, CSI-MIPI camera
Form Factor Standard Mini-ITX (170mm x 170mm)
Internal Header/ Connectors 2x CAN bus 2.0B
1x 18/24bit single CH LVDS
1x 18/24bit TTL box header
1x LCD DDC (I2C)
1x LCD backlight connector
1x CSI-MIPI
2x USB 2.0 host
1x GPIOx8 pin header
2x RS232 box header
1x SIM socket
1x SPDIF
1x Speaker box header
1x Micro-SD socket
2x I2C
Slots:
1x SATA II
1x Full size Mini PCI-E with USB interface
Edge I/O 1x DC-in Jack (19V)
1x Gigabit
1x Mic+Headphone
2x USB 2.0 host
1x USB OTG
1x HDMI
1x COM (RS232/422/485)
Jumpers, Switch & Buttons 1x Boot media select switch (SD/eMMC)
1x Reset button
1x Power button
1x GPI button
1x (RS232/422/485) selection jumper
1x Backlight power (5/12V) jumper
RP-101-SMC RISC Carrier Board for SMARC SoM,19V DC-in, Mini-ITX 170mmx170mm, 2x CAN, Mini PCIe with USB, Resistive touch header (4-wires), 2x USB header, 1x I²C header, 18/24 bit LVDS, TTL connector, Line in/ Line out, EEROM, CSI MIPI bus, 8x GPIO, 2x RS232, 1x RS232/422/485, VDDIO=1.8V

RELATED PRODUCTS