iBase

RISC Platform

RP-101-SMC/RP-102-SMC

Carrier Board for SMARC Modules

For SMARC form factor modules19V DC-in, reset, power, RTC functionSupports Gigabit LAN, audio, USB OTG, HDMI, COM (RS232/422/485) Micro SD socket, Mini PCI-E with USB, SIM socket on board2x isolated CAN transceiver, TTL, LVDS, HDMI, CSI-MIPI camera
Form Factor Standard Mini-ITX
RP-101-SMC: SMARC V1.1 modules
RP-102-SMC: SMARC V1.0 modules
Internal Header/ Connectors 2x CAN bus 2.0B
1x 18/24bit single CH LVDS
1x 18/24bit TTL box header
1x LCD DDC (I²C)
1x LCD backlight connector
1x CSI-MIPI
2x USB 2.0 host
8x GPIO pin header
2x RS232 box header
1x SIM socket
1x SPDIF
1x Speaker box header
1x Micro-SD socket
2x I²C
Slots:
1x SATA II
1x Full-size Mini PCI-E with USB interface
Edge I/O 1x DC-in Jack (12V)
1x Gigabit
1x Mic+Headphone
2x USB 2.0 host
1x USB OTG
1x HDMI
1x COM (RS232/422/485)
Jumpers, Switch & Buttons 1x Boot media select switch (SD/eMMC)
1x Reset button
1x Power button
1x GPI button
1x (RS232/422/485) selection jumper
1x Backlight power jumper
Power 19V DC-in
Dimensions 170mm x 170mm (6.7” x 6.7”)
Operating Temperature -40° C to +85° C (-40°F~184°F)
Devices Linux, Android
Software Support Non-operating: 3 Hz to 500 Hz, 15 mins
Relative Humidity 0 % to 90 % RH at 60° C (non-condensing)
Certification CE/FCC Class A
RP-101-SMC RISC Carrier Board for SMARC V1.0 modules,12V DC-in, Mini-ITX 170mmx170mm, 2x CAN, Mini PCI-E with USB, Resistive touch header (4-wires), 2x USB header,1x I²C header, 18/24 bit LVDS, TTL connector, Line in/ Line out, EEROM, CSI MIPI bus, 8x GPIO,
2x RS232,1x RS232/422/485, VDDIO=1.8V
RP-102-SMC RISC Carrier Board for SMARC V1.0 modules,12V DC-in, Mini-ITX 170mmx170mm, 2x CAN, Mini PCI-E with USB, Resistive touch header (4-wires), 2x USB header,1x I²C header, 18/24 bit LVDS, TTL connector, Line in/ Line out, EEROM, CSI MIPI bus, 8x GPIO,
2x RS232,1x RS232/422/485, VDDIO=3.3V

RELATED PRODUCTS